PL2303 USB to UART TTL Cable Module 4p 4 pin RS232 Converter
PL2303 PL2303HX USB to UART TTL Cable module 4p 4 pin RS232 Converter
Supports baud rate from 75 to 128000
Support Linux, Mac OS, WinCE and Windows (XP, Vista Win 7 inc 64 Bit Edition)
PL2303 USB to Serial Controller adopted
Cable length : 1 meter aprox
4 connecting wires, 2.54mm pitch type
Red Wire == VCC, (+5V)
Black Wire ==GND
Green Wire == TXD
White Wire == RXD
Connection method: Brush requires only three lines, generally used only three signal lines RX TX GND, VCC.
Note: After setting 3.3V and 5.0V output (this is to the microcontroller power supply, no need to upgrade the machine)
please put the small plate unplug from the computer, set the jumper to take, do not charged to avoid damage to the device.
1PC PL2303 USB TO TTL Serial Cable