OLED Display Module 12864 0.96 Inch 4Pin yellow/ Blue IIC I2C LED For Arduino
The instructions on four needles IIC interface module
Four needles iic interface is relatively simple, only two signal lines
1. The GND power to
2. The VCC power supply is (3 ~ 5.5 V)
3. The SCL OLED D0 feet, for the clock pin in the IIC communication
4. The SDA OLED D1 feet, in the IIC communication pin for the data
The instructions on four needles IIC interface module
Four needles iic interface is relatively simple, only two signal lines
1. The GND power to
2. The VCC power supply is (3 ~ 5.5 V)
3. The SCL OLED D0 feet, for the clock pin in the IIC communication
4. The SDA OLED D1 feet, in the IIC communication pin for the data
| Features: Needn't backlight, the display unit can self-luminous High resolution: 128 * 64 Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: :-30 C~70C Module Size: 27.0MM * 27.0MM * 4.1MM SPI Interface, need 4 IO only. Driver IC: SSD1306 Color Blue |
Package contains:
1PC OLED Display Module 12864 0.96 Inch 4Pin Blue IIC I2C LED For Arduino
Write Your Own Review
Featured Product
