ATMEGA328P-PU ATMEGA328 Microcontroller DIP28 IC

Features:

An ATmega328 in DIP package, pre-loaded with theOptiboot Bootloader. This will allow you to use code in your custom embedded project without having to use an actual board.The name says it all on this one.

To get this chip working with IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection.

Atmel\'s ATMega328 8-Bit Processor in 28 pin DIP package. It\'s like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. 1.8V to 5V operating voltage!

Specifications:

Number of Pins: 28
Architecture: 8-bit
Op.Temperature:-40 ~ 85°C
Series: ATMega
4.5V-5.5V operating range
Up to 20MHz
Part: ATMEGA328P-AU
32kB Flash program memory
1kB EEPROM
2kB Internal SRAM
Two 8-bit Timer/Counters
One 16-bit Timer/Counter
RTC with separate oscillator
6 PWM Channels
8 Channel 10-bit ADC
Serial USART
Master/Slave SPI interface
2-wire (I2C) interface
Watchdog timer
Analog comparator
23 IO lines
Data retention: 20 years at 85oC/ 100 years at 25oC

Applications:
1 Burglar alarm system
2 Smoke and fire alarm system
3Garage door controllers
4 Car door controllers
5 Car alarm system
6 Security system
7 Cordless telephones
8 Other remote control systems

Package Contains:

1PC ATMEL MICOROCONTROLLER ATMEGA328P-PU (DIP-28)